From 400b738678bf6f0b65a76a4ec2925473ba3e06ff Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Thu, 15 Apr 2010 17:39:08 -0400
Subject: [PATCH] ath9k_hw: abstract the AR_PHY_AGC_CONTROL register access
This is so we can share routines which access this register
on calib.c
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
drivers/net/wireless/ath/ath9k/ar9002_phy.h | 7 -------
drivers/net/wireless/ath/ath9k/ar9003_phy.h | 13 -------------
drivers/net/wireless/ath/ath9k/reg.h | 15 +++++++++++++++
3 files changed, 15 insertions(+), 20 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.h b/drivers/net/wireless/ath/ath9k/ar9002_phy.h
index 4fe204ed3a7ce..afe48086250df 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.h
@@ -120,13 +120,6 @@
#define AR_PHY_AGC_CTL1_COARSE_HIGH 0x003F8000
#define AR_PHY_AGC_CTL1_COARSE_HIGH_S 15
-#define AR_PHY_AGC_CONTROL 0x9860
-#define AR_PHY_AGC_CONTROL_CAL 0x00000001
-#define AR_PHY_AGC_CONTROL_NF 0x00000002
-#define AR_PHY_AGC_CONTROL_ENABLE_NF 0x00008000
-#define AR_PHY_AGC_CONTROL_FLTR_CAL 0x00010000
-#define AR_PHY_AGC_CONTROL_NO_UPDATE_NF 0x00020000
-
#define AR_PHY_CCA 0x9864
#define AR_PHY_MINCCA_PWR 0x0FF80000
#define AR_PHY_MINCCA_PWR_S 19
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index 70e647b13e0aa..4e1177dc24acb 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -359,7 +359,6 @@
#define AR_PHY_SWITCH_COM_2 (AR_SM_BASE + 0x8c)
#define AR_PHY_RX_CHAINMASK (AR_SM_BASE + 0xa0)
#define AR_PHY_CAL_CHAINMASK (AR_SM_BASE + 0xc0)
-#define AR_PHY_AGC_CONTROL (AR_SM_BASE + 0xc4)
#define AR_PHY_CALMODE (AR_SM_BASE + 0xc8)
#define AR_PHY_FCAL_1 (AR_SM_BASE + 0xcc)
#define AR_PHY_FCAL_2_0 (AR_SM_BASE + 0xd0)
@@ -509,18 +508,6 @@
#define AR_PHY_GC_ENABLE_DAC_FIFO 0x00000800 /* fifo between bb and dac */
#define AR_PHY_RX_DELAY_DELAY 0x00003FFF /* delay from wakeup to rx ena */
-#define AR_PHY_AGC_CONTROL_CAL 0x00000001 /* do internal calibration */
-#define AR_PHY_AGC_CONTROL_NF 0x00000002 /* do noise-floor calibration */
-#define AR_PHY_AGC_CONTROL_OFFSET_CAL 0x00000800 /* allow offset calibration */
-#define AR_PHY_AGC_CONTROL_ENABLE_NF 0x00008000 /* enable noise floor calibration to happen */
-#define AR_PHY_AGC_CONTROL_FLTR_CAL 0x00010000 /* allow tx filter calibration */
-#define AR_PHY_AGC_CONTROL_NO_UPDATE_NF 0x00020000 /* don't update noise floor automatically */
-#define AR_PHY_AGC_CONTROL_EXT_NF_PWR_MEAS 0x00040000 /* extend noise floor power measurement */
-#define AR_PHY_AGC_CONTROL_CLC_SUCCESS 0x00080000 /* carrier leak calibration done */
-
-#define AR_PHY_AGC_CONTROL_YCOK_MAX 0x000003c0
-#define AR_PHY_AGC_CONTROL_YCOK_MAX_S 6
-
#define AR_PHY_CALMODE_IQ 0x00000000
#define AR_PHY_CALMODE_ADC_GAIN 0x00000001
#define AR_PHY_CALMODE_ADC_DC_PER 0x00000002
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 7758d99a84d46..aacc29a5ad712 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -1776,4 +1776,19 @@ enum {
* pcu_txsm.
*/
+#define AR9300_SM_BASE 0xa200
+#define AR9002_PHY_AGC_CONTROL 0x9860
+#define AR9003_PHY_AGC_CONTROL AR9300_SM_BASE + 0xc4
+#define AR_PHY_AGC_CONTROL (AR_SREV_9300_20_OR_LATER(ah) ? AR9003_PHY_AGC_CONTROL : AR9002_PHY_AGC_CONTROL)
+#define AR_PHY_AGC_CONTROL_CAL 0x00000001 /* do internal calibration */
+#define AR_PHY_AGC_CONTROL_NF 0x00000002 /* do noise-floor calibration */
+#define AR_PHY_AGC_CONTROL_OFFSET_CAL 0x00000800 /* allow offset calibration */
+#define AR_PHY_AGC_CONTROL_ENABLE_NF 0x00008000 /* enable noise floor calibration to happen */
+#define AR_PHY_AGC_CONTROL_FLTR_CAL 0x00010000 /* allow tx filter calibration */
+#define AR_PHY_AGC_CONTROL_NO_UPDATE_NF 0x00020000 /* don't update noise floor automatically */
+#define AR_PHY_AGC_CONTROL_EXT_NF_PWR_MEAS 0x00040000 /* extend noise floor power measurement */
+#define AR_PHY_AGC_CONTROL_CLC_SUCCESS 0x00080000 /* carrier leak calibration done */
+#define AR_PHY_AGC_CONTROL_YCOK_MAX 0x000003c0
+#define AR_PHY_AGC_CONTROL_YCOK_MAX_S 6
+
#endif
--
2.30.2