From 43570f78a25ca18d09a1455a764ca198e9af9060 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Wed, 24 Jul 2019 19:10:18 -0500 Subject: [PATCH] arm64: dts: ti: k3-am65-base-board: Add IPC sub-mailbox nodes for R5Fs Add the sub-mailbox nodes that are used to communicate between MPU and the two R5F remote processors present in the MCU domain to the AM654 EVM base board. These sub-mailbox nodes utilize the System Mailbox clusters 0 and 1. The interrupts associated with the Mailbox Cluster User interrupt used by the sub-mailbox nodes are also added. The GIC_SPI interrupt to be used is dynamically allocated and managed by the System Firmware through the ti-sci-intr irqchip driver. All the remaining mailbox clusters are currently not used on A53 core, and so are disabled. The sub-mailbox nodes added match the hard-coded mailbox configuration used within the TI RTOS IPC software packages. The Cortex R5F processor sub-system is assumed to be running in Split mode, so a sub-mailbox node is used by each of the R5F cores. Only the sub-mailbox node from cluster 0 is used in case of Lockstep mode. Signed-off-by: Suman Anna Signed-off-by: Tero Kristo --- .../arm64/boot/dts/ti/k3-am654-base-board.dts | 58 +++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 1102b84f853d7..5a1f7c4e01c66 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -280,3 +280,61 @@ &pcie1_ep { status = "disabled"; }; + +&mailbox0_cluster0 { + interrupts = <164 0>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-tx = <1 0 0>; + ti,mbox-rx = <0 0 0>; + }; +}; + +&mailbox0_cluster1 { + interrupts = <165 0>; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-tx = <1 0 0>; + ti,mbox-rx = <0 0 0>; + }; +}; + +&mailbox0_cluster2 { + status = "disabled"; +}; + +&mailbox0_cluster3 { + status = "disabled"; +}; + +&mailbox0_cluster4 { + status = "disabled"; +}; + +&mailbox0_cluster5 { + status = "disabled"; +}; + +&mailbox0_cluster6 { + status = "disabled"; +}; + +&mailbox0_cluster7 { + status = "disabled"; +}; + +&mailbox0_cluster8 { + status = "disabled"; +}; + +&mailbox0_cluster9 { + status = "disabled"; +}; + +&mailbox0_cluster10 { + status = "disabled"; +}; + +&mailbox0_cluster11 { + status = "disabled"; +}; -- 2.30.2