From 46d0c519e44bf31f45dd0a62654c75cae76215b8 Mon Sep 17 00:00:00 2001 From: Andrew Davis Date: Wed, 9 Aug 2023 19:38:05 -0500 Subject: [PATCH] arm64: dts: ti: k3-am65: Enable OSPI nodes at the board level OSPI nodes defined in the top-level AM65x SoC dtsi files are incomplete and may not be functional unless they are extended with pinmux and device information. As the attached OSPI device is only known about at the board integration level, these nodes should only be enabled when provided with this information. Disable the OSPI nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by: Andrew Davis Link: https://lore.kernel.org/r/20230810003814.85450-5-afd@ti.com Signed-off-by: Nishanth Menon --- arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 1 + arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 2 ++ arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 1 + 3 files changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi index e26bd988e5224..6041862d5aa75 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi @@ -593,6 +593,7 @@ }; &ospi0 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index 1c16c3cac612b..616230ecfc33d 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -297,6 +297,7 @@ power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; ospi1: spi@47050000 { @@ -311,6 +312,7 @@ power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 734b051c97000..aac243bacfeea 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -530,6 +530,7 @@ }; &ospi0 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; -- 2.30.2