From 4763009eb10de0c17929322c2e54c6632dfc0280 Mon Sep 17 00:00:00 2001 From: Philippe Schenker Date: Tue, 22 Nov 2022 16:54:38 +0100 Subject: [PATCH] arm64: dts: verdin-imx8mm: Disable usb over-current Disable usb over-current of the chipidea driver on all Carrier-Boards used by Toradex. Do this as we don't want to use this functionality on our Carrier Boards and to leave it open to someone who includes our module-level device-trees. Remove the now obsolete disable-over-current flag from module-level device-tree imx8mm-verdin.dtsi and leave it as already mentioned to the people actually implementing the carrier-board to implement this. This will prevent the warning "No over current polarity defined" from being printed on boot. Signed-off-by: Philippe Schenker Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi | 2 ++ arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi index c2a5c2f7b204b..0360f6a08d300 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi @@ -136,11 +136,13 @@ /* Verdin USB_1 */ &usbotg1 { + disable-over-current; status = "okay"; }; /* Verdin USB_2 */ &usbotg2 { + disable-over-current; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index 0d454e0e2f7c8..0680cee9aeb08 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -741,7 +741,6 @@ adp-disable; dr_mode = "otg"; hnp-disable; - over-current-active-low; samsung,picophy-dc-vol-level-adjust = <7>; samsung,picophy-pre-emp-curr-control = <3>; srp-disable; @@ -751,7 +750,6 @@ /* Verdin USB_2 */ &usbotg2 { dr_mode = "host"; - over-current-active-low; samsung,picophy-dc-vol-level-adjust = <7>; samsung,picophy-pre-emp-curr-control = <3>; vbus-supply = <®_usb_otg2_vbus>; -- 2.30.2