From 623efc4cbd6115db36716e31037cb6d1f3ce6754 Mon Sep 17 00:00:00 2001 From: Maher Sanalla Date: Tue, 9 May 2023 17:56:01 +0300 Subject: [PATCH] net/mlx5e: Do not update SBCM when prio2buffer command is invalid The shared buffer pools configuration which are stored in the SBCM register are updated when the user changes the prio2buffer mapping. However, in case the user desired prio2buffer change is invalid, which can occur due to mapping a lossless priority to a not large enough buffer, the SBCM update should not be performed, as the user command is failed. Thus, Perform the SBCM update only after xoff threshold calculation is performed and the user prio2buffer mapping is validated. Fixes: a440030d8946 ("net/mlx5e: Update shared buffer along with device buffer changes") Signed-off-by: Maher Sanalla Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c b/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c index 0d78527451bca..7e8e96cc5cd08 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c @@ -442,11 +442,11 @@ static int update_buffer_lossy(struct mlx5_core_dev *mdev, } if (changed) { - err = port_update_pool_cfg(mdev, port_buffer); + err = update_xoff_threshold(port_buffer, xoff, max_mtu, port_buff_cell_sz); if (err) return err; - err = update_xoff_threshold(port_buffer, xoff, max_mtu, port_buff_cell_sz); + err = port_update_pool_cfg(mdev, port_buffer); if (err) return err; -- 2.30.2