From 6d44d1a1fb62e033dde18d73cbbb604663eb84c0 Mon Sep 17 00:00:00 2001 From: Tudor Ambarus Date: Fri, 19 Jan 2024 11:11:31 +0000 Subject: [PATCH] arm64: dts: exynos: gs101: define USI8 with I2C configuration USI8 I2C is used to communicate with an eeprom found on the battery connector. Define USI8 in I2C configuration. USI8 CONFIG register comes with a 0x0 reset value, meaning that USI8 doesn't have a default protocol (I2C, SPI, UART) at reset. Thus the selection of the protocol is intentionally left for the board dts file. Reviewed-by: Sam Protsenko Signed-off-by: Tudor Ambarus Link: https://lore.kernel.org/r/20240119111132.1290455-8-tudor.ambarus@linaro.org Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/google/gs101.dtsi | 29 ++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi index dd2d6eededaa8..6ded153cb475d 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi @@ -372,6 +372,35 @@ interrupts = ; }; + usi8: usi@109700c0 { + compatible = "google,gs101-usi", + "samsung,exynos850-usi"; + reg = <0x109700c0 0x20>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI8_USI_CLK>, + <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>; + clock-names = "pclk", "ipclk"; + samsung,sysreg = <&sysreg_peric0 0x101c>; + status = "disabled"; + + hsi2c_8: i2c@10970000 { + compatible = "google,gs101-hsi2c", + "samsung,exynosautov9-hsi2c"; + reg = <0x10970000 0xc0>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c8_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>, + <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI8_USI_CLK>; + clock-names = "hsi2c", "hsi2c_pclk"; + status = "disabled"; + }; + }; + usi_uart: usi@10a000c0 { compatible = "google,gs101-usi", "samsung,exynos850-usi"; -- 2.30.2