From 749c47ad3383f344ab080ccb1905e10b2470d70f Mon Sep 17 00:00:00 2001
From: Marijn Suijten <marijn.suijten@somainline.org>
Date: Sun, 4 Feb 2024 18:35:22 +0100
Subject: [PATCH] arm64: dts: qcom: sdm630-nile: Enable and configure PM660L
WLED
The board-specific (electrical) configuration was removed from PM660L in
90ba636e40cb ("arm64: dts: qcom: pm660l: Remove board-specific WLED
configuration") as it is platform-dependent. We reintroduce it here in
the Nile board configuration (with a slightly lower current limit, as
per downstream DT sources) and enable it for use in the dsi0 node.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20240204-sdm630-nile-wled-v1-1-9f5c4f8147f2@somainline.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
---
arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index f06a9f0cf97c1..819a5f8825e78 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -241,6 +241,16 @@
};
};
+&pm660l_wled {
+ status = "okay";
+
+ qcom,switching-freq = <800>;
+ qcom,ovp-millivolt = <29600>;
+ qcom,current-boost-limit = <970>;
+ qcom,current-limit-microamp = <17500>;
+ qcom,num-strings = <2>;
+};
+
&pon_pwrkey {
status = "okay";
};
--
2.30.2