From 8525d04ba8a6a9ecfa4bd619c988ca873a5fc2a4 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 12 Jan 2018 23:12:05 +0300 Subject: [PATCH] drm: rcar-du: lvds: Fix LVDS startup on R-Car Gen2 According to the latest revision 2.00 of the R-Car Gen2 manual, the LVDS and the bias circuit must be enabled after the LVDS I/O pins are enabled, not before. Fix the Gen2 LVDS startup sequence accordingly. While at it, also fix the comment preceding the first LVDCR0 write that still talks about hardcoding the LVDS mode 0. Fixes: 90374b5c25c9 ("drm/rcar-du: Add internal LVDS encoder support") Signed-off-by: Sergei Shtylyov Reviewed-by: Laurent Pinchart Tested-by: Laurent Pinchart Signed-off-by: Laurent Pinchart --- drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c b/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c index abbb7b25129a9..dcffd3b59b694 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c @@ -59,11 +59,8 @@ static void rcar_du_lvdsenc_start_gen2(struct rcar_du_lvdsenc *lvds, rcar_lvds_write(lvds, LVDPLLCR, pllcr); - /* - * Select the input, hardcode mode 0, enable LVDS operation and turn - * bias circuitry on. - */ - lvdcr0 = (lvds->mode << LVDCR0_LVMD_SHIFT) | LVDCR0_BEN | LVDCR0_LVEN; + /* Select the input and set the LVDS mode. */ + lvdcr0 = lvds->mode << LVDCR0_LVMD_SHIFT; if (rcrtc->index == 2) lvdcr0 |= LVDCR0_DUSEL; rcar_lvds_write(lvds, LVDCR0, lvdcr0); @@ -73,6 +70,10 @@ static void rcar_du_lvdsenc_start_gen2(struct rcar_du_lvdsenc *lvds, LVDCR1_CHSTBY(3) | LVDCR1_CHSTBY(2) | LVDCR1_CHSTBY(1) | LVDCR1_CHSTBY(0) | LVDCR1_CLKSTBY); + /* Enable LVDS operation and turn bias circuitry on. */ + lvdcr0 |= LVDCR0_BEN | LVDCR0_LVEN; + rcar_lvds_write(lvds, LVDCR0, lvdcr0); + /* * Turn the PLL on, wait for the startup delay, and turn the output * on. -- 2.30.2