From 8721e18ca6960f3c5a6a7f58245d9ab084ad09dd Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Thu, 4 May 2023 19:04:30 +0300
Subject: [PATCH] arm64: dts: qcom: enable dual ("bonded") DSI mode for DB845c

Now as both lt9611 and drm/msm drivers were updated to handle the 4k
modes over DSI, enable "bonded" DSI mode on DB845c. This way the board
utilizes both DSI links and thus can support 4k on the HDMI output.

Cc: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230504160430.4014206-1-dmitry.baryshkov@linaro.org
---
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 36 ++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index e14fe9bbb386a..4dea2c04b22fa 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -419,6 +419,9 @@
 	status = "okay";
 	vdda-supply = <&vreg_l26a_1p2>;
 
+	qcom,dual-dsi-mode;
+	qcom,master-dsi;
+
 	ports {
 		port@1 {
 			endpoint {
@@ -434,6 +437,31 @@
 	vdds-supply = <&vreg_l1a_0p875>;
 };
 
+&dsi1 {
+	vdda-supply = <&vreg_l26a_1p2>;
+
+	qcom,dual-dsi-mode;
+
+	/* DSI1 is slave, so use DSI0 clocks */
+	assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_b>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&dsi1_phy {
+	vdds-supply = <&vreg_l1a_0p875>;
+	status = "okay";
+};
+
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			   <GCC_QSPI_CORE_CLK_SRC>,
@@ -493,6 +521,14 @@
 				};
 			};
 
+			port@1 {
+				reg = <1>;
+
+				lt9611_b: endpoint {
+					remote-endpoint = <&dsi1_out>;
+				};
+			};
+
 			port@2 {
 				reg = <2>;
 
-- 
2.30.2