From 892943d7729bbfb2edeed9e323eba9a5cec21c49 Mon Sep 17 00:00:00 2001 From: Christoph Niedermaier Date: Tue, 2 May 2023 13:14:24 +0200 Subject: [PATCH] ARM: dts: imx6ull-dhcor: Set and limit the mode for PMIC buck 1, 2 and 3 According to Renesas Electronics (formerly Dialog Semiconductor), the standard AUTO mode of the PMIC DA9061 can lead to stability problems depending on the hardware revision. It is recommended to set a defined mode such as PFM or PWM permanently. So set and limit the mode for buck 1, 2 and 3 to a fixed one. Fixes: 611b6c891e40 ("ARM: dts: imx6ull-dhcom: Add DH electronics DHCOM i.MX6ULL SoM and PDK2 board") Signed-off-by: Christoph Niedermaier Reviewed-by: Marek Vasut Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6ull-dhcor-som.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi index 5882c7565f649..32a6022625d97 100644 --- a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi +++ b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi @@ -8,6 +8,7 @@ #include #include #include +#include #include "imx6ull.dtsi" / { @@ -84,16 +85,20 @@ regulators { vdd_soc_in_1v4: buck1 { + regulator-allowed-modes = ; /* PFM */ regulator-always-on; regulator-boot-on; + regulator-initial-mode = ; regulator-max-microvolt = <1400000>; regulator-min-microvolt = <1400000>; regulator-name = "vdd_soc_in_1v4"; }; vcc_3v3: buck2 { + regulator-allowed-modes = ; /* PWM */ regulator-always-on; regulator-boot-on; + regulator-initial-mode = ; regulator-max-microvolt = <3300000>; regulator-min-microvolt = <3300000>; regulator-name = "vcc_3v3"; @@ -106,8 +111,10 @@ * the voltage is set to 1.5V. */ vcc_ddr_1v35: buck3 { + regulator-allowed-modes = ; /* PWM */ regulator-always-on; regulator-boot-on; + regulator-initial-mode = ; regulator-max-microvolt = <1500000>; regulator-min-microvolt = <1500000>; regulator-name = "vcc_ddr_1v35"; -- 2.30.2