From 8de98a319a2b4b091b8723b4af9d639bfcff8b7c Mon Sep 17 00:00:00 2001 From: Jacopo Mondi Date: Thu, 4 Apr 2024 03:20:09 +0300 Subject: [PATCH] arm64: dts: debix-a: Disable i2c2 in base .dts The I2C2 bus is used for the CSI and DSI connectors only, no devices are connected to it on neither the Debix Model A nor its IO board. Disable the bus in the board's .dts and remove its clock frequency settings, as the value depends solely on the devices conncted to the CSI and DSI connectors. Display panel or camera sensor overlays will configure and enable the bus when necessary. Signed-off-by: Jacopo Mondi Signed-off-by: Laurent Pinchart Reviewed-by: Kieran Bingham Reviewed-by: Marco Felsch Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts index 2c19766ebf093..9b8f97a84e619 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts @@ -197,10 +197,8 @@ }; &i2c2 { - clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; }; &i2c3 { -- 2.30.2