From 99c70e7286237ea0701523555623faf6b49ce0db Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Tue, 5 Mar 2019 19:53:14 -0500 Subject: [PATCH] arm64: dts: qcom: pm8998: add gpio-ranges This adds the gpio-ranges property so that the GPIO pins are initialized by the GPIO framework and not pinctrl. This fixes a circular dependency between these two frameworks so GPIO hogging can be used on this board. This was not tested on this particular hardware, however this same change was tested on qcom-pm8941 using a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/pm8998.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 43cb5ea14089d..4872f116758d8 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -93,6 +93,7 @@ compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8998_gpio 0 0 26>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; -- 2.30.2