From 9b60a3ed5569a70bbdd29e3c9ec4c5d4685c6e2c Mon Sep 17 00:00:00 2001 From: Sven Schnelle Date: Mon, 5 Feb 2024 20:47:17 +0100 Subject: [PATCH] hw/net/tulip: add chip status register values MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Netbsd isn't able to detect a link on the emulated tulip card. That's because netbsd reads the Chip Status Register of the Phy (address 0x14). The default phy data in the qemu tulip driver is all zero, which means no link is established and autonegotation isn't complete. Therefore set the register to 0x3b40, which means: Link is up, Autonegotation complete, Full Duplex, 100MBit/s Link speed. Also clear the mask because this register is read only. Signed-off-by: Sven Schnelle Reviewed-by: Philippe Mathieu-Daudé Reviewed-by: Helge Deller Tested-by: Helge Deller Signed-off-by: Helge Deller --- hw/net/tulip.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/net/tulip.c b/hw/net/tulip.c index 6d4fb06dad..1f2ef20977 100644 --- a/hw/net/tulip.c +++ b/hw/net/tulip.c @@ -421,7 +421,7 @@ static uint16_t tulip_mdi_default[] = { /* MDI Registers 8 - 15 */ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /* MDI Registers 16 - 31 */ - 0x0003, 0x0000, 0x0001, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, + 0x0003, 0x0000, 0x0001, 0x0000, 0x3b40, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, }; @@ -429,7 +429,7 @@ static uint16_t tulip_mdi_default[] = { static const uint16_t tulip_mdi_mask[] = { 0x0000, 0xffff, 0xffff, 0xffff, 0xc01f, 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0fff, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, + 0x0fff, 0x0000, 0xffff, 0xffff, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, }; -- 2.30.2