From 9c9b11871bdaa29f9bf4dc4b6f819917d824836b Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Thu, 15 Jun 2023 16:53:12 -0500 Subject: [PATCH] arm64: dts: imx8mm-beacon: Change camera I2C address The DSI to HDMI bridge uses the address currently assigned to the camera, so change the camera address to the alternative address of 0x10 in preparation to enable the bridge. Signed-off-by: Adam Ford Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi index bc531175ff765..d5c6fc68d656e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi @@ -141,11 +141,11 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - camera@3c { + camera@10 { compatible = "ovti,ov5640"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ov5640>; - reg = <0x3c>; + reg = <0x10>; clocks = <&clk IMX8MM_CLK_CLKO1>; clock-names = "xclk"; assigned-clocks = <&clk IMX8MM_CLK_CLKO1>; -- 2.30.2