From 9ce975bf6b4b014c928392775c7957a65a81e365 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 30 Aug 2020 15:51:32 +0200 Subject: [PATCH] ARM: dts: exynos: Correct S3C RTC bindings and enable it in Trats The S3C RTC requires 32768 Hz clock as input which is provided by PMIC (Maxim MAX8997). However there is no clock provided for the PMIC and the driver registers the clock as regulator. This is an old driver which will not be updated so add a workaround: 1. Enable the "clock" regulator in PMIC, 2. Add a fixed-clock to fill missing clock phandle reference in S3C RTC. This allows to enable the S3C RTC and fixes dtbs_check warnings: arch/arm/boot/dts/exynos4210-trats.dt.yaml: rtc@10070000: clocks: [[5, 346]] is too short arch/arm/boot/dts/exynos4210-trats.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski Tested-by: Marek Szyprowski Link: https://lore.kernel.org/r/20200830135200.24304-5-krzk@kernel.org --- arch/arm/boot/dts/exynos4210-trats.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 5cc96f04a4fa8..634f009b622eb 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -132,6 +132,13 @@ compatible = "samsung,clock-xusbxti"; clock-frequency = <24000000>; }; + + pmic_ap_clk: pmic-ap-clk { + /* Workaround for missing clock on max8997 PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; thermal-zones { @@ -444,10 +451,21 @@ regulator-name = "SAFEOUT2"; regulator-boot-on; }; + + EN32KHZ_AP { + regulator-name = "EN32KHZ_AP"; + regulator-always-on; + }; }; }; }; +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sdhci_0 { bus-width = <8>; non-removable; -- 2.30.2