From 9eb7b5e7cb50942f55c1346b0f8d940c07201202 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 17 Sep 2021 14:41:17 +0100 Subject: [PATCH] net: dpaa2-mac: add support for more ethtool 10G link modes MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Phylink documentation says: Note that the PHY may be able to transform from one connection technology to another, so, eg, don't clear 1000BaseX just because the MAC is unable to BaseX mode. This is more about clearing unsupported speeds and duplex settings. The port modes should not be cleared; phylink_set_port_modes() will help with this. So add the missing 10G modes. Signed-off-by: Russell King Acked-by: Marek Behún Acked-by: Ioana Ciornei Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c index ae6d382d87352..543c1f2024209 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c @@ -140,6 +140,11 @@ static void dpaa2_mac_validate(struct phylink_config *config, case PHY_INTERFACE_MODE_10GBASER: case PHY_INTERFACE_MODE_USXGMII: phylink_set(mask, 10000baseT_Full); + phylink_set(mask, 10000baseCR_Full); + phylink_set(mask, 10000baseSR_Full); + phylink_set(mask, 10000baseLR_Full); + phylink_set(mask, 10000baseLRM_Full); + phylink_set(mask, 10000baseER_Full); if (state->interface == PHY_INTERFACE_MODE_10GBASER) break; phylink_set(mask, 5000baseT_Full); -- 2.30.2