From 9f6acd2b4dfef81dcc45486ac704cf602c88db02 Mon Sep 17 00:00:00 2001 From: Sam Edwards Date: Fri, 1 Dec 2023 23:12:12 -0800 Subject: [PATCH] arm64: dts: rockchip: Fix Turing RK1 interrupt pinctrls The pinctrls for the hym8563 interrupt line and fan-tach input were both mistakenly defined as `pcfg_pull_none`. As these are active-low signals (level-triggered, in the hym8563 case) which may not be driven at times, these should really be pull-up. The lack of any bias results in spurious interrupts. Fix this by modifying the `rockchip,pins` properties as necessary to enable the pull-up resistors. Fixes: 2806a69f3fef6 ("arm64: dts: rockchip: Add Turing RK1 SoM support") Signed-off-by: Sam Edwards Link: https://lore.kernel.org/r/20231202071212.1606800-1-CFSworks@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi index 9570b34aca2e9..d88c0e8523565 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi @@ -235,13 +235,13 @@ &pinctrl { fan { fan_int: fan-int { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; hym8563 { hym8563_int: hym8563-int { - rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; -- 2.30.2