From a505bfb10a0fc6f4342a2521b899d61ff2461e72 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Thu, 9 Jul 2015 16:35:26 +0100
Subject: [PATCH] regulator: pwm-regulator: Ensure headings aren't confused
with properties
We're using capitalisation and removing the '-' to mitigate confusion.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
Documentation/devicetree/bindings/regulator/pwm-regulator.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
index 892b36655b3dc..23b47720b2e49 100644
--- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
@@ -3,7 +3,7 @@ Bindings for the Generic PWM Regulator
Currently supports 2 modes of operation:
-voltage-table: When in this mode, a voltage table (See below) of
+Voltage Table: When in this mode, a voltage table (See below) of
predefined voltage <=> duty-cycle values must be
provided via DT. Limitations are that the regulator can
only operate at the voltages supplied in the table.
@@ -13,7 +13,7 @@ voltage-table: When in this mode, a voltage table (See below) of
the user if the assumptions made in continuous-voltage
mode do not reign true.
-continuous-voltage: This mode uses the regulator's maximum and minimum
+Continuous Voltage: This mode uses the regulator's maximum and minimum
supplied voltages specified in the
regulator-{min,max}-microvolt properties to calculate
appropriate duty-cycle values. This allows for a much
--
2.30.2