From a5fde059398b5d985a3fcfea06f75cce2a88081f Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Thu, 9 Sep 2021 14:37:32 +0200 Subject: [PATCH] arm64: dts: qcom: msm8998-xperia: Add camera regulators All of the machines of the Sony Yoshino platform are equipped with two cameras, sharing the same regulators configuration. Signed-off-by: AngeloGioacchino Del Regno Reviewed-by: Marijn Suijten Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20210909123733.367248-6-angelogioacchino.delregno@somainline.org --- .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 56 +++++++++++++++++++ 1 file changed, 56 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index e2cccc8314bea..2c609e2cfc4a9 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -30,6 +30,38 @@ regulator-boot-on; }; + cam0_vdig_vreg: cam0-vdig { + compatible = "regulator-fixed"; + regulator-name = "cam0_vdig"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam0_vdig_default>; + }; + + cam1_vdig_vreg: cam1-vdig { + compatible = "regulator-fixed"; + regulator-name = "cam1_vdig"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam1_vdig_default>; + vin-supply = <&vreg_s3a_1p35>; + }; + + cam_vio_vreg: cam-vio-vreg { + compatible = "regulator-fixed"; + regulator-name = "cam_vio_vreg"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&pmi8998_gpio 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam_vio_default>; + vin-supply = <&vreg_lvs1a_1p8>; + }; + touch_vddio_vreg: touch-vddio-vreg { compatible = "regulator-fixed"; regulator-name = "touch_vddio_vreg"; @@ -278,6 +310,16 @@ }; &pmi8998_gpio { + cam_vio_default: cam-vio-active { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-disable; + drive-push-pull; + output-low; + qcom,drive-strength = ; + power-source = <1>; + }; + vib_default: vib-en { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; @@ -540,6 +582,20 @@ drive-strength = <2>; }; + cam0_vdig_default: cam0-vdig-default { + pins = "gpio21"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + cam1_vdig_default: cam1-vdig-default { + pins = "gpio25"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + hall_sensor0_default: acc-cover-open { pins = "gpio124"; function = "gpio"; -- 2.30.2