From ae2d329f104b75a0a78dcaded29fe6283289cdf9 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 18 Jan 2023 10:16:46 +0200 Subject: [PATCH] drm/bridge: lt9611: fix sleep mode setup On atomic_post_disable the bridge goes to the low power state. However the code disables too much of the chip, so the HPD event is not being detected and delivered to the host. Reduce the power saving in order to get the HPD event. Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong Signed-off-by: Dmitry Baryshkov Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-2-dmitry.baryshkov@linaro.org --- drivers/gpu/drm/bridge/lontium-lt9611.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c b/drivers/gpu/drm/bridge/lontium-lt9611.c index 3ce4e495aee50..95a962e62ae41 100644 --- a/drivers/gpu/drm/bridge/lontium-lt9611.c +++ b/drivers/gpu/drm/bridge/lontium-lt9611.c @@ -449,12 +449,11 @@ static void lt9611_sleep_setup(struct lt9611 *lt9611) { 0x8023, 0x01 }, { 0x8157, 0x03 }, /* set addr pin as output */ { 0x8149, 0x0b }, - { 0x8151, 0x30 }, /* disable IRQ */ + { 0x8102, 0x48 }, /* MIPI Rx power down */ { 0x8123, 0x80 }, { 0x8130, 0x00 }, - { 0x8100, 0x01 }, /* bandgap power down */ - { 0x8101, 0x00 }, /* system clk power down */ + { 0x8011, 0x0a }, }; regmap_multi_reg_write(lt9611->regmap, -- 2.30.2