From bd0a62a667c4a4ee790376641e06f7b17000496f Mon Sep 17 00:00:00 2001 From: Roger Lu Date: Thu, 2 Feb 2023 20:41:04 +0800 Subject: [PATCH] soc: mediatek: mtk-svs: add thermal voltage compensation if needed Some extreme test environment may keep IC temperature very low or very high during system boot stage. For stability concern, we add thermal voltage compenstation if needed no matter svs bank phase is in init02 or mon mode. Signed-off-by: Roger Lu Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20230202124104.16504-4-roger.lu@mediatek.com Signed-off-by: Matthias Brugger --- drivers/soc/mediatek/mtk-svs.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/soc/mediatek/mtk-svs.c b/drivers/soc/mediatek/mtk-svs.c index 8127fb6d587bf..b9c96182a46a6 100644 --- a/drivers/soc/mediatek/mtk-svs.c +++ b/drivers/soc/mediatek/mtk-svs.c @@ -558,7 +558,7 @@ static int svs_adjust_pm_opp_volts(struct svs_bank *svsb) } /* Get thermal effect */ - if (svsb->phase == SVSB_PHASE_MON) { + if (!IS_ERR_OR_NULL(svsb->tzd)) { ret = thermal_zone_get_temp(svsb->tzd, &tzone_temp); if (ret || (svsb->temp > SVSB_TEMP_UPPER_BOUND && svsb->temp < SVSB_TEMP_LOWER_BOUND)) { @@ -573,7 +573,8 @@ static int svs_adjust_pm_opp_volts(struct svs_bank *svsb) temp_voffset += svsb->tzone_ltemp_voffset; /* 2-line bank update all opp volts when running mon mode */ - if (svsb->type == SVSB_HIGH || svsb->type == SVSB_LOW) { + if (svsb->phase == SVSB_PHASE_MON && (svsb->type == SVSB_HIGH || + svsb->type == SVSB_LOW)) { opp_start = 0; opp_stop = svsb->opp_count; } @@ -589,11 +590,6 @@ static int svs_adjust_pm_opp_volts(struct svs_bank *svsb) /* do nothing */ goto unlock_mutex; case SVSB_PHASE_INIT02: - svsb_volt = max(svsb->volt[i], svsb->vmin); - opp_volt = svs_bank_volt_to_opp_volt(svsb_volt, - svsb->volt_step, - svsb->volt_base); - break; case SVSB_PHASE_MON: svsb_volt = max(svsb->volt[i] + temp_voffset, svsb->vmin); opp_volt = svs_bank_volt_to_opp_volt(svsb_volt, @@ -1683,7 +1679,7 @@ static int svs_bank_resource_setup(struct svs_platform *svsp) } } - if (svsb->mode_support & SVSB_MODE_MON) { + if (!IS_ERR_OR_NULL(svsb->tzone_name)) { svsb->tzd = thermal_zone_get_zone_by_name(svsb->tzone_name); if (IS_ERR(svsb->tzd)) { dev_err(svsb->dev, "cannot get \"%s\" thermal zone\n", @@ -2122,6 +2118,7 @@ static struct svs_bank svs_mt8192_banks[] = { .type = SVSB_LOW, .set_freq_pct = svs_set_bank_freq_pct_v3, .get_volts = svs_get_bank_volts_v3, + .tzone_name = "gpu1", .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT, .mode_support = SVSB_MODE_INIT02, .opp_count = MAX_OPP_ENTRIES, @@ -2139,6 +2136,10 @@ static struct svs_bank svs_mt8192_banks[] = { .core_sel = 0x0fff0100, .int_st = BIT(0), .ctl0 = 0x00540003, + .tzone_htemp = 85000, + .tzone_htemp_voffset = 0, + .tzone_ltemp = 25000, + .tzone_ltemp_voffset = 7, }, { .sw_id = SVSB_GPU, -- 2.30.2