From cf08fa74c716cf20e5038d1e7dbbd7dba1b76062 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 13 Sep 2023 16:29:17 +0800 Subject: [PATCH] regulator: mt6358: Add output voltage fine tuning to fixed regulators The "fixed" LDO regulators found on the MT6358 and MT6366 PMICs have either no voltage selection register, or only one valid setting. However these do have a fine voltage calibration setting that can slightly boost the output voltage from 0 mV to 100 mV, in 10 mV increments. Add support for this by changing these into linear range regulators. Some register definitions that are missing are also added. Signed-off-by: Chen-Yu Tsai Reviewed-by: AngeloGioacchino Del Regno Acked-by: Lee Jones Link: https://lore.kernel.org/r/20230913082919.1631287-3-wenst@chromium.org Signed-off-by: Mark Brown --- drivers/regulator/mt6358-regulator.c | 15 +++++++++++++-- include/linux/mfd/mt6358/registers.h | 6 ++++++ 2 files changed, 19 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/mt6358-regulator.c b/drivers/regulator/mt6358-regulator.c index a1eae45f5fee5..b34ad85db771b 100644 --- a/drivers/regulator/mt6358-regulator.c +++ b/drivers/regulator/mt6358-regulator.c @@ -123,10 +123,13 @@ struct mt6358_regulator_info { .type = REGULATOR_VOLTAGE, \ .id = MT6358_ID_##vreg, \ .owner = THIS_MODULE, \ - .n_voltages = 1, \ + .n_voltages = 11, \ + .vsel_reg = MT6358_##vreg##_ANA_CON0, \ + .vsel_mask = GENMASK(3, 0), \ .enable_reg = enreg, \ .enable_mask = BIT(enbit), \ .min_uV = volt, \ + .uV_step = 10000, \ }, \ .status_reg = MT6358_LDO_##vreg##_CON1, \ .qi = BIT(15), \ @@ -219,10 +222,13 @@ struct mt6358_regulator_info { .type = REGULATOR_VOLTAGE, \ .id = MT6366_ID_##vreg, \ .owner = THIS_MODULE, \ - .n_voltages = 1, \ + .n_voltages = 11, \ + .vsel_reg = MT6358_##vreg##_ANA_CON0, \ + .vsel_mask = GENMASK(3, 0), \ .enable_reg = enreg, \ .enable_mask = BIT(enbit), \ .min_uV = volt, \ + .uV_step = 10000, \ }, \ .status_reg = MT6358_LDO_##vreg##_CON1, \ .qi = BIT(15), \ @@ -476,8 +482,13 @@ static const struct regulator_ops mt6358_volt_table_ops = { .get_status = mt6358_get_status, }; +/* "Fixed" LDOs with output voltage calibration +0 ~ +10 mV */ static const struct regulator_ops mt6358_volt_fixed_ops = { .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = mt6358_get_buck_voltage_sel, + .set_voltage_time_sel = regulator_set_voltage_time_sel, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, diff --git a/include/linux/mfd/mt6358/registers.h b/include/linux/mfd/mt6358/registers.h index 3d33517f178c6..5ea2590be7108 100644 --- a/include/linux/mfd/mt6358/registers.h +++ b/include/linux/mfd/mt6358/registers.h @@ -262,6 +262,12 @@ #define MT6358_LDO_VBIF28_CON3 0x1db0 #define MT6358_VCAMA1_ANA_CON0 0x1e08 #define MT6358_VCAMA2_ANA_CON0 0x1e0c +#define MT6358_VFE28_ANA_CON0 0x1e10 +#define MT6358_VCN28_ANA_CON0 0x1e14 +#define MT6358_VBIF28_ANA_CON0 0x1e18 +#define MT6358_VAUD28_ANA_CON0 0x1e1c +#define MT6358_VAUX18_ANA_CON0 0x1e20 +#define MT6358_VXO22_ANA_CON0 0x1e24 #define MT6358_VCN33_ANA_CON0 0x1e28 #define MT6358_VSIM1_ANA_CON0 0x1e2c #define MT6358_VSIM2_ANA_CON0 0x1e30 -- 2.30.2