From d0570a575aa83116bd0f6a99c4de548af773d950 Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Sun, 8 Nov 2020 19:51:05 +0100 Subject: [PATCH] arm64: dts: ls1028a: fix ENETC PTP clock input On the LS1028A the ENETC reference clock is connected to 4th HWA output, see Figure 7 "Clock subsystem block diagram". The PHC may run with a wrong frequency. ptp_qoriq_auto_config() will read the clock speed of the clock given in the device tree. It is likely that, on the reference board this wasn't noticed because both clocks have the same frequency. But this must not be always the case. Fix it. Fixes: 49401003e260 ("arm64: dts: fsl: ls1028a: add ENETC 1588 timer node") Signed-off-by: Michael Walle Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index ac17752ab3ece..ae5769cf4e95a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -952,7 +952,7 @@ ethernet@0,4 { compatible = "fsl,enetc-ptp"; reg = <0x000400 0 0 0 0>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen 2 3>; little-endian; fsl,extts-fifo; }; -- 2.30.2