From d528c29fa7526adf7074fb166b99df7d5fd90670 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Tue, 6 Jun 2023 13:22:09 -0500 Subject: [PATCH] arm64: dts: ti: k3-j721e-beagleboneai64: Move camera gpio pinctrl to gpio node Move the GPIO mux configuration needed for camera module to work to the GPIO node instead of the I2C node. Camera nodes are maintained as overlay files, but the common mux is always needed to ensure that camera probes fine and ensuring the mux is configured as part of the GPIO module allows for the multiple overlay files to be simpler. Cc: Robert Nelson Suggested-by: Udit Kumar Signed-off-by: Nishanth Menon Link: https://lore.kernel.org/r/20230606182220.3661956-4-nm@ti.com Signed-off-by: Vignesh Raghavendra --- arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts index a7b686cab3e67..e9fadacb4d5ad 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts @@ -593,7 +593,7 @@ &main_i2c1 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&main_i2c1_pins_default &csi1_gpio_pins_default>; + pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; }; @@ -623,7 +623,7 @@ &main_i2c5 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&main_i2c5_pins_default &csi0_gpio_pins_default>; + pinctrl-0 = <&main_i2c5_pins_default>; clock-frequency = <400000>; }; @@ -688,6 +688,11 @@ status = "disabled"; }; +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&csi1_gpio_pins_default>, <&csi0_gpio_pins_default>; +}; + &usb_serdes_mux { idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */ }; -- 2.30.2