From d7f4a65cdf4f671296fab1e5b331fd3f5ab776e5 Mon Sep 17 00:00:00 2001 From: Piyush Mehta Date: Wed, 22 Sep 2021 19:23:18 +0530 Subject: [PATCH] dt-bindings: gpio: zynqmp: Add binding documentation for modepin This patch adds DT binding document for zynqmp modepin GPIO controller. Modepin GPIO controller has four GPIO pins which can be configurable as input or output. Modepin driver is a bridge between the peripheral driver and GPIO pins. It has set and get APIs for accessing GPIO pins, based on the device-tree entry of reset-gpio property in the peripheral driver, every pin can be configured as input/output and trigger GPIO pin. For more information please refer zynqMp TRM link: Link: https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf Chapter 2: Signals, Interfaces, and Pins Table 2-2: Clock, Reset, and Configuration Pins - PS_MODE Signed-off-by: Piyush Mehta Acked-by: Michal Simek Reviewed-by: Rob Herring Signed-off-by: Bartosz Golaszewski --- .../gpio/xlnx,zynqmp-gpio-modepin.yaml | 43 +++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml diff --git a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml new file mode 100644 index 0000000000000..31c0fc3459035 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: ZynqMP Mode Pin GPIO controller + +description: + PS_MODE is 4-bits boot mode pins sampled on POR deassertion. Mode Pin + GPIO controller with configurable from numbers of pins (from 0 to 3 per + PS_MODE). Every pin can be configured as input/output. + +maintainers: + - Piyush Mehta + +properties: + compatible: + const: xlnx,zynqmp-gpio-modepin + + gpio-controller: true + + "#gpio-cells": + const: 2 + +required: + - compatible + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + zynqmp-firmware { + gpio { + compatible = "xlnx,zynqmp-gpio-modepin"; + gpio-controller; + #gpio-cells = <2>; + }; + }; + +... -- 2.30.2