From e46b08b09919df757a907d161cd8b8c28e73a022 Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Mon, 24 Feb 2020 12:50:52 +0100 Subject: [PATCH] arm64: dts: ls1028: sl28: explicitly enable network ports Since commit b9213899d2b0 ("arm64: dts: ls1028a: disable all enetc ports by default") all the network ports are disabled by default. This makes sense, but now we have to enable them explicitly in the boards. Do so for the sl28 module. Since we are at it. Make sure the second port is only enabled for the variant 4 of the module. Variant 3 has only one network port. Signed-off-by: Michael Walle Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts | 1 + arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts index f659e89face82..df212ed5bb942 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts @@ -21,6 +21,7 @@ &enetc_port1 { phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; + status = "okay"; mdio { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index d221ed471cdec..e6ad2f64e64e2 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -35,6 +35,7 @@ &enetc_port0 { phy-handle = <&phy0>; phy-connection-type = "sgmii"; + status = "okay"; mdio { #address-cells = <1>; -- 2.30.2