From e642c831ebdd560b5f3ffa731f1e8280eecca2f6 Mon Sep 17 00:00:00 2001
From: =?utf8?q?Michal=20Vok=C3=A1=C4=8D?= <michal.vokac@ysoft.com>
Date: Fri, 31 Jul 2020 14:00:07 +0200
Subject: [PATCH] =?utf8?q?ARM:=20dts:=20imx6dl-yapp4:=20Add=20Y=20Soft=20I?=
 =?utf8?q?OTA=C2=A0Orion=20board?=
MIME-Version: 1.0
Content-Type: text/plain; charset=utf8
Content-Transfer-Encoding: 8bit

Add devicetree for new variant of the Y Soft IOT appliance.
The board is based on Hydra with the following changes:

 - faster SoC (1GHz), 4GB RAM and 64GB eMMC
 - removed miniPCIe
 - removed Audio jack
 - removed uSD slot
 - removed RJ10 serial
 - HDMI replaced by USB host

Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 arch/arm/boot/dts/Makefile               |  1 +
 arch/arm/boot/dts/imx6dl-yapp4-orion.dts | 50 ++++++++++++++++++++++++
 2 files changed, 51 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-yapp4-orion.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4572db3fa5ae3..eec0d61874a4f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -482,6 +482,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-wandboard-revd1.dtb \
 	imx6dl-yapp4-draco.dtb \
 	imx6dl-yapp4-hydra.dtb \
+	imx6dl-yapp4-orion.dtb \
 	imx6dl-yapp4-ursa.dtb \
 	imx6q-apalis-eval.dtb \
 	imx6q-apalis-ixora.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-orion.dts b/arch/arm/boot/dts/imx6dl-yapp4-orion.dts
new file mode 100644
index 0000000000000..0428720417ef6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-orion.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2020 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Orion i.MX6DualLite board";
+	compatible = "ysoft,imx6dl-yapp4-orion", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
-- 
2.30.2