From e7f32d8f2e972b25a5a6865d57db611efb2ddf00 Mon Sep 17 00:00:00 2001 From: Christoph Niedermaier Date: Thu, 25 Jan 2024 13:46:21 +0100 Subject: [PATCH] ARM: dts: imx6ull-dhcom: Remove /omit-if-no-ref/ from node usdhc1-pwrseq Remove /omit-if-no-ref/ from node usdhc1-pwrseq, because if the compile flag -@ (include symbols) is used the node will always be there. In this case, GPIO H is not released and therefore cannot be used. Therefore, remove this node manually from the corresponding devicetree file and don't rely on /omit-if-no-ref/. Signed-off-by: Christoph Niedermaier Signed-off-by: Shawn Guo --- arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi | 4 +++- arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi | 2 +- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi index 040421f9c9700..5e39f8dc1351f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi @@ -14,10 +14,12 @@ */ /* - * To use usdhc1 as SD card, the WiFi node must be deleted. + * To use usdhc1 as SD card, the WiFi node must be deleted. The associated + * pwrseq node is also deleted in order to ensure that GPIO H is released. * BT is also not available, so remove BT from the UART node. */ /delete-node/ &brcmf; +/delete-node/ &usdhc1_pwrseq; /delete-node/ &bluetooth; / { diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi index 830b5a5064f28..f914fe3818c2f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi @@ -52,7 +52,7 @@ }; /* SoM with WiFi/BT: WiFi pin WL_REG_ON is connected to a DHCOM GPIO */ - /omit-if-no-ref/ usdhc1_pwrseq: usdhc1-pwrseq { + usdhc1_pwrseq: usdhc1-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; /* GPIO H */ }; -- 2.30.2