From ecbdcbcd6f78fcf1c50e804b9baf065a36b61d26 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Mon, 14 Nov 2022 11:50:43 +0100 Subject: [PATCH] arm64: dts: qcom: sm6375-pdx225: Enable SD card slot Set SDHCI VMMC/VQMMC to <=2v96 and allow load setting by the SDHCI driver, as required by this use case. Configure the SD Card Detect pin, enable the SDHCI2 controller and assign it the aforementioned regulators. Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20221114105043.36698-4-konrad.dybcio@linaro.org --- .../qcom/sm6375-sony-xperia-murray-pdx225.dts | 33 +++++++++++++++++-- 1 file changed, 31 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts index 004a4d2f70997..5d4fc17e2fc45 100644 --- a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts +++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts @@ -191,7 +191,8 @@ pm6125_l5: l5 { regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <3050000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; }; pm6125_l6: l6 { @@ -273,7 +274,8 @@ pm6125_l22: l22 { regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <3544000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; }; pm6125_l23: l23 { @@ -332,6 +334,33 @@ }; }; +&sdc2_off_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm6125_l22>; + vqmmc-supply = <&pm6125_l5>; + + cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; +}; + &tlmm { gpio-reserved-ranges = <13 4>; -- 2.30.2