From eea166561f7c70128263637cf99b1576b4bd1be4 Mon Sep 17 00:00:00 2001 From: Luca Ceresoli Date: Wed, 20 Apr 2022 16:24:31 +0200 Subject: [PATCH] pinctrl: rockchip: fix RK3308 pinmux bits [ Upstream commit 1f3e25a068832f8892a5ff71467622d012f5bc9f ] Some of the pinmuxing bits described in rk3308_mux_recalced_data are wrong, pointing to non-existing registers. Fix the entire table. Also add a comment in front of each entry with the same string that appears in the datasheet to make the table easier to compare with the docs. This fix has been tested on real hardware for the gpio3b3_sel entry. Fixes: 7825aeb7b208 ("pinctrl: rockchip: add rk3308 SoC support") Signed-off-by: Luca Ceresoli Reviewed-by: Heiko Stuebner Link: https://lore.kernel.org/r/20220420142432.248565-1-luca.ceresoli@bootlin.com Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin --- drivers/pinctrl/pinctrl-rockchip.c | 45 ++++++++++++++++++++---------- 1 file changed, 30 insertions(+), 15 deletions(-) diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index 923ff21a44c05..543a4991cf700 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -455,95 +455,110 @@ static struct rockchip_mux_recalced_data rk3128_mux_recalced_data[] = { static struct rockchip_mux_recalced_data rk3308_mux_recalced_data[] = { { + /* gpio1b6_sel */ .num = 1, .pin = 14, .reg = 0x28, .bit = 12, .mask = 0xf }, { + /* gpio1b7_sel */ .num = 1, .pin = 15, .reg = 0x2c, .bit = 0, .mask = 0x3 }, { + /* gpio1c2_sel */ .num = 1, .pin = 18, .reg = 0x30, .bit = 4, .mask = 0xf }, { + /* gpio1c3_sel */ .num = 1, .pin = 19, .reg = 0x30, .bit = 8, .mask = 0xf }, { + /* gpio1c4_sel */ .num = 1, .pin = 20, .reg = 0x30, .bit = 12, .mask = 0xf }, { + /* gpio1c5_sel */ .num = 1, .pin = 21, .reg = 0x34, .bit = 0, .mask = 0xf }, { + /* gpio1c6_sel */ .num = 1, .pin = 22, .reg = 0x34, .bit = 4, .mask = 0xf }, { + /* gpio1c7_sel */ .num = 1, .pin = 23, .reg = 0x34, .bit = 8, .mask = 0xf }, { + /* gpio3b4_sel */ .num = 3, .pin = 12, .reg = 0x68, .bit = 8, .mask = 0xf }, { + /* gpio3b5_sel */ .num = 3, .pin = 13, .reg = 0x68, .bit = 12, .mask = 0xf }, { + /* gpio2a2_sel */ .num = 2, .pin = 2, - .reg = 0x608, - .bit = 0, - .mask = 0x7 + .reg = 0x40, + .bit = 4, + .mask = 0x3 }, { + /* gpio2a3_sel */ .num = 2, .pin = 3, - .reg = 0x608, - .bit = 4, - .mask = 0x7 + .reg = 0x40, + .bit = 6, + .mask = 0x3 }, { + /* gpio2c0_sel */ .num = 2, .pin = 16, - .reg = 0x610, - .bit = 8, - .mask = 0x7 + .reg = 0x50, + .bit = 0, + .mask = 0x3 }, { + /* gpio3b2_sel */ .num = 3, .pin = 10, - .reg = 0x610, - .bit = 0, - .mask = 0x7 + .reg = 0x68, + .bit = 4, + .mask = 0x3 }, { + /* gpio3b3_sel */ .num = 3, .pin = 11, - .reg = 0x610, - .bit = 4, - .mask = 0x7 + .reg = 0x68, + .bit = 6, + .mask = 0x3 }, }; -- 2.30.2