From f1317928fa03203929665af61e6d9ac0e29ea84d Mon Sep 17 00:00:00 2001 From: Dario Binacchi Date: Sat, 27 Jan 2024 16:28:47 +0100 Subject: [PATCH] ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco In the schematics of document UM2033, the power supply for the micro SD card is the same 3v3 voltage that is used to power other devices on the board. By generalizing the name of the voltage regulator, it can be referenced by other nodes in the device tree without creating misunderstandings. This patch is preparatory for future developments. Signed-off-by: Dario Binacchi Reviewed-by: Raphael Gallais-Pou Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/st/stm32f769-disco.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/st/stm32f769-disco.dts b/arch/arm/boot/dts/st/stm32f769-disco.dts index 5d12ae25b3274..660f859841641 100644 --- a/arch/arm/boot/dts/st/stm32f769-disco.dts +++ b/arch/arm/boot/dts/st/stm32f769-disco.dts @@ -92,9 +92,9 @@ clock-names = "main_clk"; }; - mmc_vcard: mmc_vcard { + vcc_3v3: vcc-3v3 { compatible = "regulator-fixed"; - regulator-name = "mmc_vcard"; + regulator-name = "vcc_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; @@ -128,7 +128,7 @@ &sdio2 { status = "okay"; - vmmc-supply = <&mmc_vcard>; + vmmc-supply = <&vcc_3v3>; cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>; broken-cd; pinctrl-names = "default", "opendrain", "sleep"; -- 2.30.2