From f7e630bcae48279659c31ba974cbf9cf596c2300 Mon Sep 17 00:00:00 2001 From: Chris Healy Date: Wed, 22 Jul 2020 13:33:41 -0700 Subject: [PATCH] ARM: dts: ZII: Disable HW Ethernet switch reset GPIOs Disable Ethernet switch reset GPIO with ZII platforms that have it enabled. HW switch reset results in a reset of the copper PHYs inside of the switch. We want to avoid this reset of the copper PHYs in the switch as this results in unnecessary broader network disruption on a soft reboot of the application processor. With the HW GPIO removed, the switch driver still performs a soft reset of the switch core which has been shown to sufficiently meet our needs with other ZII platforms that do not have the HW switch reset GPIO defined. Signed-off-by: Chris Healy Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-zii-cfu1.dts | 2 -- arch/arm/boot/dts/vf610-zii-spb4.dts | 2 -- arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts | 2 -- arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts | 2 -- 4 files changed, 8 deletions(-) diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts index 64e0e95092266..50da0c94e1b7f 100644 --- a/arch/arm/boot/dts/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -172,7 +172,6 @@ interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; ports { #address-cells = <1>; @@ -356,7 +355,6 @@ pinctrl_switch: switch-grp { fsl,pins = < VF610_PAD_PTB28__GPIO_98 0x3061 - VF610_PAD_PTE2__GPIO_107 0x1042 >; }; diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts index 9e5187ba3fa6f..6c6ec46fd0154 100644 --- a/arch/arm/boot/dts/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/vf610-zii-spb4.dts @@ -129,7 +129,6 @@ pinctrl-names = "default"; reg = <0>; eeprom-length = <65536>; - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; @@ -326,7 +325,6 @@ pinctrl_gpio_switch0: pinctrl-gpio-switch0 { fsl,pins = < - VF610_PAD_PTE2__GPIO_107 0x31c2 VF610_PAD_PTB28__GPIO_98 0x219d >; }; diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts index 569614b08f048..73fdace4cb424 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts @@ -118,7 +118,6 @@ pinctrl-names = "default"; reg = <0>; eeprom-length = <65536>; - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; @@ -293,7 +292,6 @@ pinctrl_gpio_switch0: pinctrl-gpio-switch0 { fsl,pins = < - VF610_PAD_PTE2__GPIO_107 0x31c2 VF610_PAD_PTB28__GPIO_98 0x219d >; }; diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts index b6b0f302b7b4d..fe600ab2e4bd0 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts @@ -143,7 +143,6 @@ pinctrl-names = "default"; reg = <0>; eeprom-length = <65536>; - reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; @@ -333,7 +332,6 @@ pinctrl_gpio_switch0: pinctrl-gpio-switch0 { fsl,pins = < - VF610_PAD_PTE2__GPIO_107 0x31c2 VF610_PAD_PTB28__GPIO_98 0x219d >; }; -- 2.30.2